Portland Walnut

Decorative panel for the side of a 24"D by 96"H cabinet or accessory (pantry cabinet, oven cabinet, refrigerator panel, etc...). Comes as a 2 piece door set.

**The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled.**

Width 9" | Height 34-1/2" | Depth 24"

1 full height door base cabinet. This cabinet will not come with a shelf.

Width 36" | Height 96" | Depth 1/4"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 48" | Height 36" | Depth 1/4"

Finished back panel. Commonly used to finish the back of an island. Grain will run vertically (along the height) and the panel will be finished on one side.

Width 96" | Height 48" | Depth 1/4"

Finished back panel. Commonly used to finish the back of an island.

Width 30" | Height 34-1/2" | Depth 24"

Farm sink base cabinet that will fit most farm sinks that are 24" to 27" wide. The tallest farm sink that will work with this cabinet is 10-3/4". Doors are each 14-1/2"W x 19"H. The height from the door cutout to the top of the face frame is 11-1/4". The width of the top opening is approximately 23-3/4". The height from the top of the opening to where the horizontal stile begins is 2-7/8", and the stile height is 8-3/8".

Width 33" | Height 34-1/2" | Depth 24"

Farm sink base cabinet that will fit most farm sinks that are 27" to 30" wide. The tallest farm sink that will work with this cabinet is 10-3/4". Doors are each 16-1/4"W x 19"H. The height from the door cutout to the top of the face frame is 11-1/4". The width of the top opening is approximately 27-3/4". The height from the top of the opening to where the horizontal stile begins is 2-7/8", and the stile height is 8-3/8".

Width 36" | Height 34-1/2" | Depth 24"

Farm sink base cabinet that will fit most farm sinks that are 30" to 33" wide. The tallest farm sink that will work with this cabinet is 10-3/4". Doors are each 17-7/10"W x 19"H. The height from the door cutout to the top of the face frame is 11-1/4". The width of the top opening is 29-3/4". The height from the top of the opening to where the horizontal stile begins is 2-7/8", and the stile height is 8-3/8".

Width 3" | Height 36-1/2" | Depth 3"

Decorative full leg. The top flat section is 4" and the bottom flat section is 6-1/4". It is trimmable if needed.

Width 1.5" | Height 1" | Depth 96"

Light rail molding that comes in an 8 foot strip. Commonly used to hide lighting under wall cabinets.

Width 33" | Height 34-1/2" | Depth 24"

1 door lazy susan corner cabinet that takes up 33" of wall space from the corner out, on each wall. This cabinet comes with two separate spindles sitting on wood supports. There is no pole down the middle taking up space. The lazy susan shelves are secured on 3/4" supports. Mounted on each 3/4" support unit is a ball bearing spindle which makes the pie cut trays spin smoothly.

Width 36" | Height 34-1/2" | Depth 24"

1 door lazy susan corner cabinet that takes up 36" of wall space from the corner out, on each wall. This cabinet comes with two separate spindles sitting on wood supports. There is no pole down the middle taking up space. The lazy susan shelves are secured on 3/4" supports. Mounted on each 3/4" support unit is a ball bearing spindle which makes the pie cut trays spin smoothly.