Metro White - Quick Ship

Width 39" | Height 34-1/2" | Depth 24"

1 door blind base corner cabinet that takes up a minimum of 42-1/2" of wall space and can be pulled up to 49". The actual cabinet width is 39" and has a minimum pull of 3-1/2" and a maximum pull of 10" from the corner. This cabinet has 1 drawer and is reversible. The door measurements are 15-7/8W x 22-1/2H x 3/4D. The drawer front measurements are 15-3/4W x 6 1/4H x 3/4D. The drawer box is 12-3/8W x 3 3/8H x 20-3/8D and the door opening is 12-3/4"W x 20-1/2"H. The stile between the door opening and blind opening is 10" wide. A filler must be installed between the blind cabinet and the adjacent wall cabinet (so it's perpendicular to the blind cabinet).

Width 48" | Height 6" | Depth 3/4"

Arched valance. Minimum height in the middle of the valance is 3".

Width 48" | Height 1-1/2" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2‚¬ on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc... or the raw edge will have to be finished.

Width 60" | Height 1-1/2" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2‚¬ on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc...or the raw edge will have to be finished.

Width 5-1/2" | Height 29" | Depth 3/4"

Overlay filler to be used with a regular filler. *Regular filler must be purchased separately*

Width 5-1/2" | Height 35" | Depth 3/4"

Overlay filler to be used with a regular filler. *Regular filler must be purchased separately*

Width 96" | Height 1-3/4" | Depth 1-3/4"

Angled crown molding. Once installed, the molding will stick out from the cabinet about 1-13/16", and will be about 1-3/4" high.

Width 3" | Height 34-1/2" | Depth 3"

Classic Decorative Leg.

Width 25.5" (42" wall space on each wall) | Height 34.5" | Depth .75"

Corner sink base front and floor. Finished toe kick is not included. Once installed, this will take up 42" of wall space from the corner out, on each wall. These items should be installed between two cabinets, they cannot be used with an appliance directly on either side. To ensure proper installation, additional countertop support will be needed along the back wall and corner area. Additionally, a base support should be built on-site to provide adequate stability. Please note that hardware is not provided to attach this item to adjacent cabinets due to the flexibility and versatility of the item and how it could be used.

Width 3" | Height 34-1/2" | Depth 3"

Fluted Decorative Leg.

Width 96" | Height 3" | Depth 3"

Large angled crown molding that is approximately 3/4" thick. Once installed, the molding will stick out from the cabinet about 3", and will be about 3" high.

Width 3-1/2" | Height 12" | Depth 9"

Modern styled corbel.