Madison Honey Shaker

Width 42" |Height 34.5" |Depth 24"

2 door base cabinet with 2 drawers and 1 shelf. Cabinet has butt doors.

Width 39" |Height 34.5" |Depth 24"

1 door blind base corner cabinet that takes up a minimum of 42 1/2" of wall space and can be pulled up to 49". The actual cabinet width is 39" and has a minimum pull of 3 1/2" and a maximum pull of 10" from the corner. This cabinet has 1 drawer and is reversible. The door measurements are 15 7/8W x 22 1/2H x 3/4D. The drawer front measurements are 15 3/4W x 6 1/4H x 3/4D. The drawer box is 12 3/8W x 3 3/8H x 20 3/8D and the door opening is 12 3/4"W x 20 1/2"H. The stile between the door opening and blind opening is 10" wide. A filler must be installed between the blind cabinet and the adjacent base cabinet (so it's perpendicular to the blind cabinet).

Width 42" |Height 34.5" |Depth 21"

Vanity that has two 20-3/4" wide doors on bottom, and one 18" wide false drawer front in the middle with a 11 1/2" wide functional drawer on either side on top. Cabinet will have a center stile.

Width 42" |Height 34.5" |Depth 21"

Vanity that has 3 drawers on either end and 1 door in the middle, with a false drawer front above the door. The door and false drawer front measure 17 5/8"W. The door is 22 1/2"H and the false drawer is 6 1/4"H. For the 6 functioning drawers, the 2 top drawers are 11 1/2"W x 6 1/4"H, the bottom 4 drawers are 11 1/2"W x 11 1/8"H. Interior top drawer dimensions are 8 1/2"W x 3 3/8"H x 18"D, bottom drawer interiors are 8 1/2"W x 8 1/4"H x 18"D.

Width 11.5" |Height 41" |Depth .75"

Wall decorative end panel.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 42" |Height 96" |Depth .25"

Bead board finished panel (only finished on one side).

Width 42" |Height 96" |Depth .25"

Finished veneered panel, finished on one side.

Width 48" |Height 6" |Depth .75"

Arched valance. Minimum height in the middle of the valance is 3".

Width 48" |Height 1.5" |Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs.It can be trimmed up to 1/2” on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc...or the raw edge will have to be finished.

Width 48" |Height 6" |Depth .75"

Shaker arched valance. The height in the middle of the valance is 3".

Width 48" |Height 34.5" |Depth 21"

Vanity that has two 23-3/4" wide doors on bottom, and one 18" wide false drawer front in the middle with a 14 1/2" wide functional drawer on either side on top. Cabinet will have a center stile.

Width 48" |Height 34.5" |Depth 21"

Vanity that has 3 drawers on either end and 2 doors in the middle, with a false drawer front above the doors. The doors and false drawer front measure about 23 1/2"W. The doors are 22 1/2"H and the false drawer is 6 1/4"H. For the 6 functioning drawers, the 2 top drawers are 11 1/2"W x 6 1/4"H, the bottom 4 drawers are 11 1/2"W x 11 1/8"H. Interior top drawer dimensions are 8 1/2"W x 3 3/8"H x 18"D, bottom drawer interiors are 8 1/2"W x 8 1/4"H x 18"D.