Madison Black Shaker - Quick Ship

Width 24" | Height 36" | Depth 12"

Wall diagonal corner cabinet that takes up 24" from the corner out, on each wall. This cabinet comes with 2 shelves.

Width 24" | Height 36" | Depth 12"

Wall diagonal corner cabinet that takes up 24" from the corner out, on each wall. This cabinet comes with 2 wood shelves and will be prepped for glass (glass is not included).

Interior will match exterior.

Width 24" | Height 42" | Depth 12"

Wall diagonal corner cabinet that takes up 24" from the corner out, on each wall. This cabinet comes with 3 shelves.

Width 24" | Height 42" | Depth 12"

Wall diagonal corner cabinet that takes up 24" from the corner out, on each wall. This cabinet comes with 3 wood shelves and will be prepped for glass (glass is not included).

Interior will match exterior.

Width 30" | Height 5.25" | Depth 21"

Desk knee drawer that can be trimmed up to 27" wide, if needed.

Width 3" | Height 42" | Depth .75"

3"x42" Filler.

Width 6" | Height 42" | Depth .75"

6"x42" Filler.

Width 5.5" | Height 29" | Depth .75"

Overlay filler to be used with a regular filler. *Regular filler must be purchased separately*

Width 5.5" | Height 35" | Depth .75"

Overlay filler to be used with a regular filler. *Regular filler must be purchased separately*

Width 5.5" | Height 41" | Depth .75"

Overlay filler to be used with a regular filler. *Regular filler must be purchased separately*

Width 36" | Height 1.5" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2” on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc...or the raw edge will have to be finished.

Width 48" | Height 1.5" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2” on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc...or the raw edge will have to be finished.