Catalina Toffee - Quick Ship

Width 3" | Height 42" | Depth 3/4"

3"x42" Filler.

Width 3" | Height 96" | Depth 3/4"

3"x96" Filler.

Width 42" | Height 34-1/2" | Depth 24"

2 door base cabinet with 2 drawers and 1 shelf. Cabinet has butt doors.

Width 39" | Height 34-1/2" | Depth 24"

1 door blind base corner cabinet.

• Takes up a minimum of 42-1/2" of wall space and can be pulled up to 49"
• The actual cabinet width is 39"
• Has a minimum pull of 3-1/2" and a maximum pull of 10" from the corner
• Has 1 drawer and is reversible
• Door measurements are 15-7/8"W x 22-1/2"H x 3/4"D
• Drawer front measurements are 15-3/4"W x 6-1/4"H x 3/4"D
• Drawer box is 12-3/8"W x 3-3/8"H x 20-3/8"D
• Door opening is 12-3/4"W x 20-1/2"H
• The stile between the door opening and blind opening is 10"W
• A filler must be installed between the blind cabinet and the adjacent wall cabinet (so it's perpendicular to the blind cabinet)

Width 11-1/2" | Height 41" | Depth 3/4"

Wall decorative end panel.

*The door will not get installed behind the face frame, it will be installed onto the frame. Then, 1/4" shims would be used on the opposite side so it's leveled. As an alternative, a 1/4" skin can be purchased instead and installed first, then the decorative door can install directly on the skin.*

Width 42" | Height 96" | Depth 1/4"

Bead board finished panel (only finished on one side).

Width 42" | Height 96" | Depth 1/4"

Finished veneered panel, finished on one side.

Width 48" | Height 1-1/2" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2 on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc... or the raw edge will have to be finished.

Width 48" | Height 6" | Depth 3/4"

Shaker arched valance. The height in the middle of the valance is 3".

Width 60" | Height 1-1/2" | Depth 11"

Floating shelf that will also include the mounting hardware. Once mounted, the shelf will be able to move or 'float' to the left and right. Each shelf can hold up to 25lbs. It can be trimmed up to 1/2 on each side but then will have a raw exposed edge so should be placed adjacent to a cabinet, panel, wall, etc... or the raw edge will have to be finished.

Width 5-1/2" | Height 29" | Depth 3/4"

Overlay filler to be used with a regular filler. *Regular filler must be purchased separately*

Width 5-1/2" | Height 35" | Depth 3/4"

Overlay filler to be used with a regular filler. *Regular filler must be purchased separately*