94" wall rail with fasteners, 8 cabinet brackets with fasteners and decorative caps, cabinet bottom fasteners, rail and cabinet shims, SnapToggles, drill bits and driver bits.

Eazy Wall rail hanging kits: A kit includes: A stock length wall rail and rail screws, cabinet bottom screws, cabinet brackets with short/long screws and Tee-nuts, plastic snap cap Tee-nut covers, plastic horseshoe rail and cabinet shims, Snap-Toggles and a drill/driver pack.

Drill/driver pack: This installation tool pack consists of: 5/16 and 3/16 twist drill bits, a spade bit for the toggles, and #3 Phillips and #2 Square driver bits. The spade bit is packaged with the Toggles. One tool pack is included with each order.

Scribe mounting tape: This 1/32 thick, double-sided mounting tape is ideal for attaching scribe molding rather than having to nail it in place. It is available in 8 foot lengths.

EZ Bracket: A single cabinet bracket complete with a T-nut, 2 different length fasteners and a screw cover.

Figuring What To Order: Cabinet layouts are typically dimensioned in inches so you first need to calculate the total length in inches needed for each layout space rail and record this length. Then subtract 2 inches from each total length and select the corresponding rail kit or kits that provides this total length.

**Please note: there must be a space of at least 1-3/16" from the tops of the wall cabinets to the ceiling, to allow for the cabinets to be mounted on the rail**