Bathroom Vanities

Width 36" | Height 15" | Depth 24"

Wall refrigerator cabinet that has 2 doors and no shelves.

Width 36" | Height 18" | Depth 24"

Wall refrigerator cabinet that has 2 doors and no shelves.

Width 15" | Height 42" | Depth .25"

Wall Skin that is 1/4" thick and can be cut to size if necessary.

Width 30" (from the corner out, on each wall) | Height 6" | Depth 12"

Spice drawer wall cabinet with 6 spice drawers. The drawers will not have any drawer glides. The interior comes finished and can also be used without the drawers as a wine rack. If the drawers are used, they are not able to be turned, the cabinet must be installed horizontally for them to function properly.

Width 48" | Height 34.5" | Depth 24"

2 door base cabinet that has 1 half depth adjustable shelf and 2 drawers. This cabinet does have a center stile and will not have butt doors.

Width 24" | Height 34.5" | Depth 24"

2 door base end angle cabinet that has 1 adjustable shelf. The sides of the cabinet that will install against the wall and adjacent cabinet are 24". Each door front area measures 18-1/4" wide.

Width 36" |Height 34.5" |Depth 24"

Blind corner base cabinet that must be pulled a minimum of 4" from the wall. It may be necessary to pull further to allow clearance for door and drawer hardware. It can be pulled a maximum of 9". The door is 14-1/2"W, and the blind area is 22"W x 28-1/2"H. A filler will be needed to go adjacent to the blind cabinet so the door/drawer will open properly.

Width 3" | Height 34.5" | Depth 24"

Base end panel that has a 1/2" thick panel with a 3" wide filler on the front. Can be installed on the left or right. Commonly used next to an exposed appliance, like a dishwasher.

Width 3" | Height 34.5" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 6" | Height 34.5" | Depth .75"

Base filler that is 3/4" thick and can be trimmed to desired height/width. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 3" | Height 34.5" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 3 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.

Width 6" | Height 34.5" | Depth .75"

Base fluted filler that is 3/4" thick and can be trimmed to desired height. Filler has 5 flutes that begin 1.5" from the top and end 1.5" from the bottom. The toe kick area is not fluted. This filler will be finished on the front, back and sides, but not the top or bottom.