Midtown Shaker Custom Colors

Width 30" | Height 34.5" | Depth 24"

Base oven cabinet with a max cut out size of 28-1/2" x 28". Opening will be cut on site by the customer, after delivery (apply extra care when cutting the front panel to avoid damage to the frame and side panels).

Width 30" | Height 34.5" | Depth 24"

3 drawer base cabinet. Top drawer front is 6-3/4" high, middle and bottom drawer fronts are 11-1/4" high.

Width 30" | Height 34.5" | Depth 24"

Farm sink base cabinet. Door heights are 17-1/2". Typically, the farm sink base should be a minimum of 3" wider than the farm sink (for example, a 30" farm sink would need a 33" farm sink base). The front panel will need to be cut on site to fit the sink and can be cut to accommodate a sink that's a maximum of 12" high.

Width 30" | Height 6" | Depth 12"

Organizer cabinet with wood veneer edge banding and a finished interior. There will be 2 horizontal shelving areas on the left which measure approximately 11-1/8"W x 2"H, and 3 vertical storage areas on the right which measure approximately 5-1/4"W x 4-3/4"H.

Width " | Height 4" | Depth "

Roll out tray to be used in a 30" base cabinet or wall pantry (up to 4 can be used in a pantry). Interior height of tray is 3-1/4". The roll out comes with full extension, ball-bearing glides (not soft-close). Please note this roll out tray will only work with this collection. ***Please specify which cabinet to install this item in under the order comments when checking out or it will ship loose.***

Width 30" | Height 34.5" | Depth 24"

Sink base cabinet with 2 doors and 1 false drawer front. This cabinet will have no shelves.

Width 30" | Height 1.25" | Depth 12"

Stemware rack that has 7 slots for glasses.

Width 30" | Height 5" | Depth 21"

Vanity knee drawer that can be trimmed up to 24" if needed. The drawer front is 23-1/2" wide, then there will be 3-1/4" of trimmable space on either side of the drawer front. The interior height of the drawer is 2-1/2". It has side mounted, ball-bearing slides (not soft close).

Width 30" | Height 34.5" | Depth 21"

Vanity sink and drawer base combo cabinet with (1) 17-1/2" wide door on the right, (1) 6-3/4" high false drawer front across the top of the entire cabinet, and (2) 11-1/2" high drawers on the left. This cabinet will not have any shelves.

Width 30" | Height 34.5" | Depth 21"

Vanity sink and drawer base combo cabinet with (1) 17-1/2" wide door on the left, (1) 6-3/4" high false drawer front across the top of the entire cabinet, and (2) 11-1/2" high drawers on the right. This cabinet will not have any shelves.

Width 30" | Height 34.5" | Depth 21"

Vanity sink base cabinet with 2 doors and 1 false drawer front. Drawer front is 6-3/4" high. This cabinet will not have any shelves.

Width 3" | Height 30" | Depth 2.25"

Wall plain pilaster. The filler the pilaster is mounted on is 3/4" deep, the pilaster itself is 1-1/2" deep. Top and bottom sections above and below the pilaster are each 2" tall. 2" will need to be trimmed from the top or bottom before installation. **Pilasters are handmade and may therefore feature inconsistencies in shape or form. These are in no way considered defects**