Bathroom Vanities

Width 48" | Height 34-1/2" | Depth 1/4"

Beaded board panel. Commonly used to give a beaded finished look.

Width 96" | Height 4" | Depth 3/4"

Crown molding with large cove detail. Installed height will be 3" and installed depth will be 2-3/4" (how far it will extend from the cabinet).

Width 96" | Height 4" | Depth 3/4"

Crown molding. Installed height will be 3-1/8" and installed depth will be 2-5/8" (how far out it will extend from the cabinet).

Width 3" | Height 36-1/2" | Depth 3"

Decorative full leg. The top flat section is 4" and the bottom flat section is 6-1/4". It is trimmable if needed.

Width 3" | Height 34-1/2" | Depth 3"

Decorative leg with that comes with a wall filler.

Width 3-1/2" | Height 12-1/2" | Depth 8"

Large corbel with a recessed center.

Width 5-1/4" | Height 12-1/2" | Depth 4-1/2"

Medium corbel with a recessed center.

Mohawk touch up kit includes: Putty crayon and marker.

Width 3-3/4" | Height 6-1/2" | Depth 3-1/2"

Small corbel with a recessed center.

Width 13.75" | Height 16.3125" | Depth 21"

Trash pull-out for a 18" or 21" base cabinet (two 29 quart waste baskets included). Trash pullout will be a natural finish and will not be pre-installed in cabinet (cabinet must be ordered separately). Includes door mounting kit. The pullout will not have soft-closing glides.

Width 12" | Height 30" | Depth 12"

1 door wall cabinet that comes with 2 shelves.

Width 23" | Height 2.875" | Depth 21"

Roll out tray to be used with a 27" wide base cabinet. The roll out tray will come pre-assembled, dovetailed, and have a soft close full extension track. They are solid birch with a natural maple finish. *Please note this roll out tray will only work with this collection*